FM-500 Light+ (Discontinued)

FM-500 Light+ is a device with GPS/GLONASS and GSM connectivity, designed for object tracking. It is able to acquire information on object location, speed, direction, etc. and transfer the data via GSM network. Digital and analog inputs of the device may be used to connect different external sensors/devices. Outputs of the device may be used to control external equipment remotely. Flexible configuration allows users/dealers to adjust the device to meet their specific requirements. It has 1-Wire (iButton), RS-232 and EIA-485 interfaces.

Certificates

 

BCE manufactured products are sold in the markets of more than 20 European countries, Russia and CIS countries, Middle Eastern, African and South American countries. The company has implemented ISO 9001 certified production line.

General specification
Interfaces

1-Wire (iButton)

RS-232

EIA-485

Inputs

4x digital (frequency, impulse counter, ON/OFF modes)

3x analogue, 11 bit, 0-36V

Outputs

3x digital, (-)

Power supply

8 – 36V

Protection from impulses up to 120V

Consumption at 12V: active: <50mA, sleep: <8 mA

Registration of power cut-off to device event log

Internal battery 700 mAh (optional)

Internal memory

4 МB, up to 150.000 entries

Accelerometer

LIS3DH

Internal odometer

+

Operational temperature range

from -40 to +85 C°

Dimensions

26x80x55 mm

Weight

Tracker – 64 g, set – 160 g

GSM

Internal antenna

GSM/GPRS class

10 (up to 85,6 kbit), class B

Detection of GSM jamming

+

GPS / GLONASS

External antenna

Sensitivity

-162 dBm

Acquisition

Cold <30 s, hot 1 s, A-GPS support

Try BCE system demo version- for free!

Accessories

13.56MHz RFID card

RFID card is the most simple, common and cheap proximity card for access control systems.
Read more

13.56MHz RFID reader (1-Wire)

Compact Embed RFID reader is designed for using with Mifare 13.56MHz keys cards.
Read more

125kHz RFID card

RFID card is the most simple, common and cheap proximity card for access control systems.
Read more

125kHz RFID key fob

Key fob is affordable proximity RFID key fob for using in access control systems.
Read more

125kHz RFID reader (1-Wire)

Compact Embed RFID reader is designed for using with 125KHz key fobs and 125KHz cards.
Read more

Magnetic iButton key

iButton key devices are small, durably and easy to care. Magnet which is under the chip lets connect key to reader and it stays there all the time. It lets to make more scenarios for identification.
Read more

iButton key

iButton key devices are small, durably and easy to care. The iButton serial number is a rugged data carrier that serves as an electronic registration number for automatic identification.
Read more

ID Reader

The driver is expected to touch the iButton to the reader to start engine or identify himself. Reader can shine in RGB colors, LED is inside.
Read more

Concrete mixer rotation magnetic sensor

Magnetic Sensor adopts hall effect when the magnetic buttons go through the front end of the Magnetic Sensor, and thus causing the magnetic field changes.
Read more

Door sensor

Mechanical or magentic sensors are used to identify vehicle door open/close operations.
Read more

Seat sensor

A load cell (or loadcell) is a transducer which converts force into a measurable electrical output.
Read more

Axle load sensor

Axle load sensor is designed for axle load control and cargo weight control in vehicle tracking systems.
Read more

USB Smart Card Reader for Tachograph

Card reader device with USB interface which connects to PC server. It can read Company Card where BCE tacho application is installed.
Read more

RFID Driver Identification

Driver identification consists of 2 devices Key fob or card and Reader. Each driver has Key fob or card with unique id number. Once Key fob or card is swiped to reader, signal is send to GPS tracking device.
Read more

Panic Button

By integrating panic buttons with vehicle tracking, it is possible to receive an immediate notification that a device has been activated.
Read more

iButton Driver Identification

Driver identification consists of 2 devices Key and Reader. Each driver has iButton key with unique id number. Once key is connected to reader, signal is send to GPS tracking device. Identification ensures that a particular vehicle is driven by the designated driver himself.
Read more

Temperature Sensor

It is a low cost temperature sensor with a 1-wire digital interface. The sensor is calibrated and doesn’t require extra components so you can get right to measuring relative temperature.
Read more

Fuel Level Sensor

Fuel Level Sensor is installed into a fuel tank of a vehicle. The sensor measures fuel level in the tank and generates an output signal to forward it to a vehicle tracking device.
Read more

Fuel Flow Meter

Fuel meter enables to receive objective information about actual fuel consumption and vehicle working time.
Read more

sCAN - Contactless CANbus Reader

S-CAN is a contactless CAN-bus reader, allowing to retrieve data from various type vehicles without physical contact with vehicle wires, thus eliminating warranty issues.
Read more

Relay

12V and 24V relays are used for making remote engine block circuit.
Read more

Contact us

Connect with us and we will offer the most suitable solution according to your individual situation and needs. During workday our experts seek to answer as quickly as possible, but usually it can take up to 1 working day.