Accessories

13.56MHz RFID card

RFID card is the most simple, common and cheap proximity card for access control systems. It is protected against electromagnetic fields and static electricity. The card has protection from the electromagnetic fields and static electricity. Personalization is performed by thermal printing, screen printing or offset printing. Each card has unique id number

13.56MHz RFID reader (1-Wire)

Compact Embed RFID reader is designed for using with Mifare 13.56MHz keys cards. It connects to the controllers via iButton (1-Wire) protocol. Embed reader supports both open (ID reading) and the protected (ID encrypting) mode for key data access. Protected mode of key ID transmission provides protection against copying and cloning. You may change the encryption keys unlimited number of times. Device is made of mechanically durable and fire-resistant metallic material.

125kHz RFID card

RFID card is the most simple, common and cheap proximity card for access control systems. It is protected against electromagnetic fields and static electricity. The card has protection from the electromagnetic fields and static electricity. Personalization is performed by thermal printing, screen printing or offset printing. Each card has unique id number.

125kHz RFID key fob

Key fob is affordable proximity RFID key fob for using in access control systems. It has a metal ring for fixing to keys. Protected from the electromagnetic fields and static electricity. Key fob is made of durable natural black leather.

125kHz RFID reader (1-Wire)

Compact Embed RFID reader is designed for using with 125KHz key fobs and 125KHz cards. It connects to the controllers via iButton (1-Wire) protocol. Device is made of mechanically durable and fire-resistant metallic material and repeats the shape of the iButton keys.

Magnetic iButton key

iButton key devices are small, durably and easy to care. Magnet which is under the chip lets connect key to reader and it stays there all the time. It lets to make more scenarios for identification. The iButton serial number is a rugged data carrier that serves as an electronic registration number for automatic identification. Enhanced by 1-Wire communications protocol, they provide the ability to send data throught reader to GPS tracking device.

iButton key

iButton key devices are small, durably and easy to care. The iButton serial number is a rugged data carrier that serves as an electronic registration number for automatic identification. Enhanced by 1-Wire communications protocol, they provide the ability to send data through reader to GPS tracking device. 

ID Reader

1-Wire iButton reader

The driver is expected to touch the iButton to the reader to start engine or identify himself. Reader can shine in RGB colors, LED is inside. Together with reader can be connected buzzer which sends audible sound with various scenarios.

Concrete mixer rotation magnetic sensor

Magnetic Sensor adopts hall effect when the magnetic buttons go through the front end of the Magnetic Sensor, and thus causing the magnetic field changes. The hall element detect this changes and convert it into an alternating electric signal. The built in circuit of sensor amplifies the signal and enable the measuring frequency range. The output signal is accurate and stable with easy installation and waterproof.

Door sensor

Mechanical or magentic sensors are used to identify vehicle door open/close operations.

Seat sensor

A load cell (or loadcell) is a transducer which converts force into a measurable electrical output. Requires a power supply.

Axle load sensor

Axle load sensor is designed for axle load control and cargo weight control in vehicle tracking systems. Axle load sensor can be connected to the analog input of tracking device.

With axle load sensor, a vehicle tracking system gets valuable information about the location and time of loading and unloading the vehicle.

USB Smart Card Reader for Tachograph

Card reader device with USB interface which connects to PC server. It can read Company Card where BCE tacho application is installed.

RFID Driver Identification

Driver identification consists of 2 devices Key fob or card and Reader. Each driver has Key fob or card with unique id number. Once Key fob or card is swiped to reader, signal is send to GPS tracking device.

Identification ensures that a particular vehicle is driven by the designated driver himself. RFID driver identification combination with the GPS tracker proves to be a very effective security or monitoring system for the vehicle. RFID is more advanced and flexible solution than iButton.

Panic Button

By integrating panic buttons with vehicle tracking, it is possible to receive an immediate notification that a device has been activated. This real-time alarm allows appropriate action to be undertaken by office-based personnel to ensure the safety of your mobile employees.

iButton Driver Identification

Driver identification consists of 2 devices Key and Reader. Each driver has iButton key with unique id number. Once key is connected to reader, signal is send to GPS tracking device. Identification ensures that a particular vehicle is driven by the designated driver himself. iButton driver identification combination with the GPS tracker proves to be a very effective security or monitoring system for the vehicle.

Temperature Sensor

It is a low cost humidity and temperature sensor with a 1-wire digital interface. The sensor is calibrated and doesn’t require extra components so you can get right to measuring relative humidity and temperature.

Fuel Level Sensor

Fuel Level Sensor is installed into a fuel tank of a vehicle. The sensor measures fuel level in the tank and generates an output signal to forward it to a vehicle tracking device. Tracking device records and processes the sensor data for further transmission to the telematics server. Server software processes and analyzes the received data to generate analytical reports for a selected period of time. The user gets the reports on vehicle fuel tank volume and consumption.

Fuel Flow Meter

In this case a pair of fuel flow meters is installed, one meter counts the quantity of fuel intake to engine, and the second meter counts the excess amount of fuel coming back from engine to tank. Fuel meter enables to receive objective information about actual fuel consumption and vehicle working time. It also permits to reduce fuel and repairing costs. It is possible to develop fuel consumption rates for selected routes and technological operations. Fuel flow meter mostly installed in cases where tank shape is difficult for example tractors.

sCAN - Contactless CANbus Reader

S-CAN is a contactless CAN-bus reader, allowing to retrieve data from various type vehicles without physical contact with vehicle wires, thus eliminating warranty issues. It doesn`t break CAN wires isolation and “listens” signal working in induction method.

Relay

12V and 24V relays are used for making remote engine block circuit.

Contact us

Contact us and we will provide most suitable solution for your company. It takes up to 1 working day to answer your inquiry.

*
*
*
*